The following errors occur only rarely. The descriptions below aim to help you to analyze and eliminate these errors.
The SAProuter receives incorrect data. This can happen if the route is too short or if the system overlooks the fact that the connection is to a SAProuter rather than a backend connection.
The SAProuter receives the route information too late (TCP/IP connection setup was successful).
The SAProuter is the client and it receives an incorrect response from the server.
The SAProuter is the server and it receives the data from the client too early.
SNC not active for a forwards connection
SNC not active for a backwards connection
Incorrect data sent to the SAProuter
The log file contains the following entries:
Thu Jun 14 09:55:36 2007 CONNECT FROM C10/- host 10.66.66.90/34506 (host1.company.corp) Thu Jun 14 09:55:36 2007 INVAL DATA C10/- route expected Thu Jun 14 09:55:36 2007 DISCONNECT C10/- host 10.66.66.90/34506 (host1.company.corp) |
The client issues the error message below.
Syntax
SAProuter Error Message
***********************************************************************
* LOCATION SAProuter 39.1 (SP3) on 'host1'
* ERROR internal error
*
* TIME Thu Jun 14 09:55:36 2007
* RELEASE 710
* COMPONENT NI (network interface)
* VERSION 39
* RC -93
* MODULE nirout.cpp
* LINE 2664
* DETAIL NiRClientHandle: route expected
* COUNTER 4
***********************************************************************
Background and Further Analysis
The client program sends incorrect data to the SAProuter. This is usually the case if the client assumes that it is already communicating with the target system but the connection was actually established to an SAProuter that has to wait for a route first. Check the parameters for the connection setup on the client.
Route sent too late
The connection setup (connect) was successful but the client sends the route to the SAProuter too late, or the client assumes that it is already connected to the server and is waiting for data, or the timeout -W is exceeded.
The log file contains the following entries:
Thu Jun 14 12:27:27 2007 CONNECT FROM C11/- host 10.66.66.90/35087 (host1.company.corp) Thu Jun 14 12:27:32 2007 CONNECT ERR C11/- no route received within 5s Thu Jun 14 12:27:32 2007 DISCONNECT C11/- host 10.66.66.90/35087 (host1.company.corp) |
The client issues the error message below.
Syntax
SAProuter Error Message
***********************************************************************
* LOCATION SAProuter 39.1 (SP3) on 'host1'
* ERROR connection timed out
*
* TIME Thu Jun 14 12:27:32 2007
* RELEASE 710
* COMPONENT NI (network interface)
* VERSION 39
* RC -5
* MODULE nirout.cpp
* LINE 6519
* DETAIL RTPENDLIST::timeoutPend: no route received within 5s
* (CONNECTED)
* COUNTER 5
***********************************************************************
Background and Further Analysis
This error can occur if the client does not send the route quickly enough after the TCP/IP connect to the SAProuter. This might be caused by the client hanging temporarily.
Incorrect response from the server
If a server-side program other than a SAProuter responds, or if the back end responds, the SAProuter cannot use t he response. It needs another SAProuter as the server.
The log file contains the following entries:
Thu Jun 14 13:59:43 2007 CONNECT FROM C9/- host 10.66.66.90/46915 (host1.company.corp) Thu Jun 14 13:59:43 2007 CONNECT TO S9/17 host 10.66.66.91/3253 (host2) Thu Jun 14 13:59:43 2007 CONNECT ERR S9/17 invalid data form server during route completion Thu Jun 14 13:59:43 2007 DISCONNECT S9/17 host 10.66.66.91/3253 (host2) |
The client issues the error message below.
Syntax
SAProuter Error Message
***********************************************************************
* LOCATION SAProuter 39.1 (SP3) on 'host1'
* ERROR internal error
*
* TIME Thu Jun 14 13:59:43 2007
* RELEASE 710
* COMPONENT NI (network interface)
* VERSION 39
* RC -93
* MODULE nirout.cpp
* LINE 2694
* DETAIL NiRClientHandle: invalid data from server 'host2' during
* route completion
* COUNTER 3
***********************************************************************
Background and Further Analysis
Check the parameters for the connection setup on the client.
Data received too early from the client
If the SAProuter, as the server, receives data from the client before the route is established, the following entries appear in the log file:
Thu Jun 14 14:15:00 2007 CONNECT FROM C10/- host 10.66.66.90/52640 (host1.company.corp) Thu Jun 14 14:15:00 2007 CONNECT TO S10/18 host 10.66.66.91/3253 (host2) Thu Jun 14 14:15:00 2007 CONNECT ERR C10/18 invalid data form client during route completion Thu Jun 14 14:15:00 2007 DISCONNECT C10/18 host 10.66.66.90/52640 (host1.company.corp) |
The client issues the error message below.
Syntax
SAProuter Error Message
***********************************************************************
* LOCATION SAProuter 39.1 (SP3) on 'host1'
* ERROR internal error
*
* TIME Thu Jun 14 14:15:00 2007
* RELEASE 710
* COMPONENT NI (network interface)
* VERSION 39
* RC -93
* MODULE nirout.cpp
* LINE 2688
* DETAIL NiRClientHandle: invalid data from client
* 'host1.company.corp' during route completion
* COUNTER 5
***********************************************************************
Background and Further Analysis
The client program is behaving incorrectly. Check for a more recent version of the client program.
Data received too early from the server
The log file contains the following entries:
Thu Jun 14 13:59:43 2007 CONNECT FROM C9/- host 10.66.66.90/46915 (host1.company.corp) Thu Jun 14 13:59:43 2007 CONNECT TO S9/17 host 10.66.66.91/3253 (host2) Thu Jun 14 13:59:43 2007 CONNECT ERR S9/17 invalid data form server during route completion Thu Jun 14 13:59:43 2007 DISCONNECT S9/17 host 10.66.66.91/3253 (host2) |
The client issues the error message below.
Syntax
SAProuter Error Message
***********************************************************************
* LOCATION SAProuter 39.1 (SP3) on 'host1'
* ERROR internal error
*
* TIME Thu Jun 14 13:59:43 2007
* RELEASE 710
* COMPONENT NI (network interface)
* VERSION 39
* RC -93
* MODULE nirout.cpp
* LINE 2694
* DETAIL NiRClientHandle: invalid data from server 'host2' during
* route completion
* COUNTER 3
***********************************************************************
Background and Further Analysis
Check the version of the SAProuter on the server side and update the program if necessary.
SNC not active for a forwards connection
The log file contains the following entries:
Thu Jun 14 17:16:40 2007 CONNECT FROM C18/ host 10.66.66.90/30891 (host1.company.corp) Thu Jun 14 17:16:40 2007 CONNECT TO S18/10 host 10.18.211.3/3299 (10.18.211.3) (p:CN=D039768, O=SAP-AG, C=DE) Thu Jun 14 17:16:40 2007 CONNECT ERR S18/10 forwarding route failed NIESNC_FAILURE Thu Jun 14 17:16:40 2007 DISCONNECT C18/10 host 10.66.66.90/30891 (host1.company.corp) |
Thu Jun 14 17:16:40 2007 CONNECT FROM C9/- host 10.18.211.3/1168 (host3.wdf.sap.corp) Thu Jun 14 17:16:40 2007 DISCONNECT C9/- host 10.18.211.3/1168 (host3.wdf.sap.corp) |
SAProuter Error Message on Client Sire
Syntax
***********************************************************************
* LOCATION SAProuter 39.1 (SP3) on 'host3'
* ERROR SNC processing failed:
* SNC not enabled
*
* TIME Thu Jun 14 17:16:40 2007
* RELEASE 710
* COMPONENT NI (network interface)
* VERSION 39
* RC -104
* MODULE nisnc.c
* LINE 566
* DETAIL NiSncOpcode: NISNC_REQ
* COUNTER 2
***********************************************************************
Background and Further Analysis
The SAProuter on the server side has not activated SNC. Restart the SAProuter on the server side with the option -K mysncname.
SNC not active for a backwards connection
The log file contains the following entries:
Thu Jun 14 17:08:19 2007 CONNECT FROM C9/ host 10.66.66.90/30883 (host1.company.corp) Thu Jun 14 17:08:19 2007 CONNECT TO S9/17 host 10.18.211.3/3299 (10.18.211.3) Thu Jun 14 17:08:19 2007 CONNECT ERR S9/17 NIESNC_FAILURE on 'SAProuter 39.1 (SP3) on 'host3'' Thu Jun 14 17:08:19 2007 DISCONNECT S9/17 host 10.18.211.3/3299 (10.18.211.3) |
Thu Jun 14 17:08:19 2007 CONNECT FROM C12/- host 10.18.211.3/1119 (host3.wdf.sap.corp) Thu Jun 14 17:08:19 2007 CONNECT TO S12/20 host 10.66.66.91/3253 (host2) Thu Jun 14 17:08:19 2007 CONNECT ERR C12/20 NIECONN_BROKEN on 'SAProuter 39.1 (SP3) on 'host3'' Thu Jun 14 17:08:19 2007 DISCONNECT C12/20 host 10.18.211.3/1119 (host3.wdf.sap.corp) |
SAProuter Error Message on Client Sire
Syntax
***********************************************************************
* LOCATION SAProuter 39.1 (SP3) on 'host3'
* ERROR SNC processing failed:
* SNC not enabled
*
* TIME Thu Jun 14 17:08:19 2007
* RELEASE 710
* COMPONENT NI (network interface)
* VERSION 39
* RC -104
* MODULE nisnc.c
* LINE 586
* DETAIL NiSncOpcode: NISNC_ACC
* COUNTER 4
***********************************************************************
Background and Further Analysis
The SAProuter on the client side has not activated SNC. Restart the SAProuter on the client side with the option -K mysncname.
2 comments:
For a Excellent Online Resource for SAP EP and SAP Web Dynpro ABAP, Visit Learn SAP Online
SAP EP - Standard Portal Services
Portal Eventing and Navigation
Portal Look and Feel - Branding the Portal
How to Develop Portal Applications
SAP EP-Developing portal content and assigning permissions
SAP EP-Role maintenance
SAP EP-How to make Enterprise Portal highly available
Implement Single Sign On
SAP EP-J2EE architechture
What is SAP Enterprise Portal
And Many More...
Basics of Web Dynpro ABAP
ABAP Data Types and Objects
ABAP Statements
WD4A - Introduction WDA - SAP Logon Procedures
WD4A-Format the Values appearing on value Axis of Business Graphic
WD4A-Navigate from one view to another and back to previous view
WD4A - How to Calculate next 12 months from current month in web dynpro ABAP
WD4A - Validate Inputs in a web dynpro ABAP Application
And Many More...
If anyone wants to become a Java developer learn from Java Training in Chennai. or learn thru Java Online Training in India . Nowadays Java has tons of job opportunities on various vertical industry.
or Javascript Training in Chennai. Nowadays JavaScript has tons of job opportunities on various vertical industry.
Post a Comment