Showing posts with label Edit Products. Show all posts
Showing posts with label Edit Products. Show all posts

Wednesday, November 21, 2007

Create Systems in Solution Manager

You create systems to use in Solution Manager projects.

The system gets the displayed data automatically for ABAP-based SAP products, if you have set-up Automatic Data Capture for the System Landscape. You can enhance this data or switch the data source to manual maintenance.

For non-ABAP SAP products and non-SAP products, you must create the systems you use in your production system landscape, yourself .

Prerequisites

You are in the transaction Solution Manager System Landscape (SMSY).

Create System with Assistants

Note Note

You can also let an assistant lead you through system creation. To call the assistant, select the landscape component Systems and choose Create New System with Assistant from the context menu.

End of the note.

Create Systems

  1. Select the landscape component Systems and choose Create New System from the context menu.

  2. Enter the system ID as system name in the next dialog box. If there are systems with identical names in your system landscape, extend the system names to distinguish them, e.g. system AAA_1 and system AAA_2.

  3. Select a product, a product version and an installation number from the possible entries help.

  4. Save your entries.

    Note Note

    In the system landscape, the Solution Manager derives the relevant main instances from the selected product, and displays them below the system in the overview tree. The SAP product definition of a main instance is an independently-installable entity. The ABAP-based main instance is automatically flagged as relevant.

    End of the note.
  5. If the automatic flagging of the relevant main instance is not correct, select the system and set the following flags in the Main Instance Selection tab, as required:

    • for ABAP-based main instances: Relevant for the relevant ABAP-based main instance and Additionally Installed for all other ABAP-based main instances

    • for non-ABAP main instances: Relevant for several non-ABAP main instances

    Note Note

    • As not always all possible main instances in the SAP product definition are installed in an actual system, you can select the actually relevant main instances for an actual installation of a product.

    • Only relevant main instances are displayed in your operational solution landscape.

    • You can only assign system components to relevant main instances.

    • To avoid inconsistencies in the solution landscape, you cannot remove the Relevant flag if the system is used in a logical component.

    End of the note.
  6. You can assign system components, e.g. an ITS, to the relevant main instances, in the Main Instance Selection tab:

    1. Set the System Component Assignment flag for the relevant main instances.

    2. Choose the system component from the possible entries help.

    3. You can Create New System Components with the Create System Components pushbutton.

  7. You can enter further system information.

    You can flag a system, for example, as planned or production.

  8. Save your entries.

Specify ABAP-based main instances for SAP products

Note Note

To be able to put several ABAP main instances in a logical component for a system, to use them in projects and solutions, flag these additional ABAP main instances as Also Installed. The system copies the flagged main instance in the left-hand side of the screen.

  1. Select the ABAP main instance in the left-hand side of the screen, below the system to be defined.

  2. To be able to generate RFC connections to this system, enter the system number and the message server in the Header Data tab.

  3. Enter the clients for the selected main instance, in the Clients tab.

  4. Enter a client number.

  5. You can enter a client name.

  6. You can select a role from the possible entries help.

  7. Specify a logical system.

  8. Save your entries.

  9. To get RFC connections for the clients:

    • assign existing RFC connections to the clients:

      1. Select a client in the Clients tab.

      2. Choose Assign and Check RFC Destinations.

      3. Select an existing RFC connection from the RFC connection type possible entries help.

      4. To also use the RFC destinations in this client for central system monitoring, set the Assign RFC Dest. for System Monitoring flag. You only need to assign this flag to one client per system.

      5. Save your selection.

    • Regenerate the RFC connections for the clients.

      For further information, see Generate RFC Connections.

      Note Note

      You cannot generate RFC connections for planned systems.

      End of the note.

    You can also perform this step later.

  10. You can specify the instances in the Instances tab. In the possible entries help for servers, the system offers you the servers which you defined previously in the landscape component Server.

  11. You can see details of the installed software components, and specify/change their Support Package status, in the Software Components tab.

  12. Save your entries.

    Note Note

    If there is an RFC connection for read access for at least one client, you can refresh system data with Read System Data Remotely. You can automatically refresh system data when you Generate the RFC Connections.

    End of the note.
End of the note.

Specify non-ABAP main instances of SAP products and main instances of non-SAP products

  1. Select the system for which you want to describe the main instances in more detail, and set the Relevant flag for the desired main instances, in the Main Instance Selection tab.

  2. Select the main instance, and enter the required data at the right-hand side of the screen.

  3. Save your entries.

Create Databases in Solution Manager

Prerequisites

You are in the Solution Manager System Landscape transaction (SMSY).

Procedure

...

1. Select the landscape component Databases, and choose Create in the context menu.

2. Enter the required data.

3. Choose attribute values from the possible entries help in the Other Attributes tab.

4. Save the changes.

End of Content Area

Create Server in Solution Manager

Use

The system determines the displayed data automatically, if you have set-up automatic data capture for the system landscape. The system cannot determine all server data automatically, so you can complete it, e.g. with the frequency.

Prerequisites

You are in the Solution Manager System Landscape transaction (SMSY).

Procedure

...

Note

If you use routers, or you must specify the Distributed Name Service name (DNS name) to generate an RFC connection, in your network, proceed as follows:

● Create the message server for a satellite system, as server, in the Solution Manager System Landscape.

● Specify the routing information for this server.

The routing information is required to generate RFC connections.

● Create the system and specify this server as message server.

For further information, see Regenerate RFC Connections.

1. Select the landscape component Server, and choose Create in the context menu.

2. Enter the required data.

3. Specify any routing information.

4. Choose attribute values from the possible entries help in the Other Attributes tab.

5. Save the changes.

Assign a System to a Product/Change Product Version in Solution Manager

After upgrading manually-created systems, which are not automatically updated, you can assign another product or product version to a system, e.g. you change the product assignment of the system when upgrading from R/3 4.6C to R/3 Enterprise 4.7.

Note Note

Automatically-captured systems can appear more than once in the landscape components, if your components cannot be assigned automatically, unambiguously to a product, e.g. the automatic data capture cannot determine whether SAP APO or SAP BW is installed in a system. In this case, the system appears under both SAP APO and SAP BW in the Solution Manager System Landscape. Flag one product as leading. (Item 4).

End of the note.
  1. Choose Other Object...

  2. Specify the system.

  3. Choose Installed Product Versions.

  4. Choose the new product data from the possible entries help.

    or

    If the new product/product version is not in the possible entries help, set the Free Product/Product Version Selection flag and enter the product data.

    or

    If an automatically-determined system is assigned to several products, set the Leading Product Version flag for a product.

  5. Save your entries and choose Continue.

    The system is shown in the new position with the landscape components, at the left-hand side.

  6. If the instances of the system have already been maintained for another product, you can copy them for the new system:

    1. Select the main instance of the product in the overview tree, and go to the Instances tab.

    2. Choose Copy Instances.

    3. Choose an Instance.

    4. Save your selection.

Create Non-SAP products in Solution Manager

You can only create non-SAP products yourself.

...

...

1. Select the landscape component General Product Definitions and choose Create in the context menu, or Other Object ® Product ® Create.

2. Enter the data required, in the following dialog box.

3. Save your entries.

The system shows the new product in the left-hand screen area.

4. Specify the product key and the product versions in the Product Versions tab, to define versions of the new product.

5. Save your entries.

The system automatically assigns a sequence to the product versions. You can change this sequence with the arrow keys.

The system automaticaaly assigns a main instance to the product, in the Components tab.

6. You can change the main instances of the new product in the Components tab.

7. Save your entries.

8. Set the Active flag for your product, to be able to use it to define your system landscape.

To flag a product as Active:

¡ at least one product version is defined, as described under 4.

¡ at least one main instance is assigned to the product, as described under 5-6.

Caution

You can only use active products to define your system landscape. Inactive products are hidden from all product selection possible entries help in the entire Solution Manager.

The system puts these entries in the system settings, where you can show or hide products.

End of Content Area

Show/Hide products in Solution Manager

SAP products are displayed in the left-hand screen area, according to the system settings.

Recommendation

You should have your system administration hide products which you do not use in your system landscape, system-wide. These products are hidden from all product selection possible entries help in the entire Solution Manager. You can choose to display or hide system-wide hidden products, in the Solution Manager System Landscape user-specific filter settings.

To display or hide products:

· To show or hide products system-wide:

§ ...

a. Choose Utilities ® System Settings ® Product Selection tab.

b. Switch to change mode.

c. Choose the products by setting the flag in the Active column.

d. Save your selection.

· You can show or hide products in your personal view with Utilities ® User-Specific Filter ® Products tab.

If you choose All Products, the system ignores the selection made under System Settings, and displays all existing products.

Note

You can display details of the version of SAP products by double-clicking on the product version. They include details of the product components.

Edit Products, Product Assignment and Product Version in solution Manager

Prerequisites

You are in the Solution Manager System Landscape transaction (SMSY).

Procedure

You can:

· Show/Hide a Product System-Wide

· Create a Non-SAP-Product

· Change the Assignment of a System to a Product

· Change the Product Version of a System